An AC hydraulic power pack runs on mains power — 230V single phase or 380V three phase — and is built for fixed installations where electricity is available and battery power is not needed. It is the standard choice for workshops, factories, presses, dock lifts and any industrial machine that sits in one place.
Fiable Hydraulics manufactures AC power packs in a compact range of 1HP, 2HP, 3HP and 5HP, each available with your choice of pump displacement and tank capacity. Pump displacement (cc/rev) determines the flow rate; tank capacity determines how long the oil can cool. Both are customisable so the power pack matches exactly what your machine needs — no over-sizing, no compromise.
Click and drag to interact in 360° and explore structural dimensions.
These are indicative ranges. Confirm actual max displacement and relief setting with your power pack datasheet. Operating above these ranges risks motor burnout.
Larger tank = longer dwell time for oil to cool = better for continuous or frequent duty. Smaller tank = compact, lower cost, suitable for occasional or intermittent use.
Duty cycle |
Recommended tank |
Why |
|---|---|---|
Occasional (a few cycles per day)
|
6–10 litres
|
Oil has time to cool between cycles
|
Frequent (hours per day)
|
15–25 litres
|
Continuous cooling is happening
|
Continuous or high-cycle press
|
35–50+ litres
|
Tank size is crucial — oversized motor with undersized tank fails fast
|
Undersizing the tank on a high-cycle machine is the fastest way to overheat the motor and fail the seals. If in doubt, go larger.
Beyond the compact range, Fiable manufactures custom AC power packs from 1HP to 100HP for applications that demand higher capacity, special porting, or integrated manifolds.
Compact Range |
Recommended |
|---|---|
Motor
|
230V single, 380V single or 415V three phase
|
Tank capacity
|
50 to 400 litres
|
Cooling
|
natural, fan-assisted, or water-cooled
|
Pump displacement
|
up to 1000 cc/rev (1000 LPM at 1500 RPM)
|
Manifold
|
single or double acting, solenoid, manual, proportional, integrated or modular
|
Our double acting hydraulic cylinders are used across industries where controlled force is needed in both directions – pushing and pulling.
Fiable Hydraulics Pvt. Ltd. is an ISO 9001:2015 certified manufacturer of hydraulic cylinders, power packs and complete hydraulic systems — designed, machined and pressure-tested at our facility in MIDC Chakan, Pune.
© 2026 Fiable Hydraulics Pvt. Ltd. All Rights Reserved.
ISO 9001:2015 Certified · Manufactured in Pune, India
