Applications · Bore Machines
Mast-raising, feed, stabiliser-jack and rod-handling cylinders, plus power packs and control valves for truck- and tractor-mounted borewell drilling rigs. Built to your rig drawing at our Chakan, Pune facility.
Where Hydraulics Work
Every function below runs on cylinders, a power pack and control valves. We supply each one — or the complete system.
Lift the drilling mast from transport position to vertical and hold it steady while drilling.
Push the hammer down into the formation and pull the rod string back up.
Level the rig on uneven ground and carry its weight during drilling.
Swing and position drill rods between the rod rack and the rotary head.
Grip the rod string and break threaded joints when adding or removing rods.
Supply pressurised oil and direct it to every function from the operator panel.
Products for Bore Machines
Choose a standard product or send your drawing — we build to your bore, stroke, rod size and mounting.
For mast raising, feed and rod handling — powered in both directions.
Built for Drilling Sites
Tell us your rig and site conditions. We select the cylinder, seals and mounting to suit them.
Seal and wiper selection matched to dusty, abrasive drilling sites.
Mountings and rod sizes chosen for hammer-drilling shock loads.
Feed and mast cylinders sized for your stroke and buckling load.
Pressure testing up to 10,000 PSI under an ISO 9001:2015 quality system.
Request a Quote
Share these details — or attach a drawing or photos of your existing cylinder — and our engineers will size the right part.
Mention “bore machine” in the requirement details so it reaches the right engineer.
FAQ
A typical borewell rig uses mast-raising cylinders, a feed or pull-down cylinder, stabiliser jack cylinders, rod-handling cylinders and clamp or breakout cylinders. The exact set depends on the rig design.
Yes. Send the drawing, or photos with the bore, rod diameter, stroke, closed length and mounting details of the old cylinder, and we will quote a replacement.
Yes. We manufacture hydraulic cylinders, power packs and directional control valves, so you can source the complete hydraulic system for your rig from one supplier.
Our products are pressure tested in-house at our Chakan facility, with test capability up to 10,000 PSI, under an ISO 9001:2015 certified quality system.
Yes. We deliver across India and export to more than 20 countries.
Send your drawing or cylinder details. Our engineering team will recommend the right cylinders, power pack and valves.
Fiable Hydraulics Pvt. Ltd. is an ISO 9001:2015 certified manufacturer of hydraulic cylinders, power packs and complete hydraulic systems — designed, machined and pressure-tested at our facility in MIDC Chakan, Pune.
© 2026 Fiable Hydraulics Pvt. Ltd. All Rights Reserved.
ISO 9001:2015 Certified · Manufactured in Pune, India
